20k PMS at Nssan Southwoods

- Replaced Power Steering assembly - Buti na lang covered ng warranty ang parts na ito... Common problem daw ito ng Livina kaso di ko naman nakikita dito sa Forum.

- I reported na may sabit ang left front passenger door ko at hindi smooth ang pag sara, at kailangan mo medyo malakas na force. Lagi ko ito nirereport tuwing PMS pero wala silang makita raw at normal daw ito lalo na pag may pressure sa loob. Kaso kahit di sarado ang ibang pinto, may ganitong problem pa rin. Just last week pinag aralan ko ulit kasi suspetsa ko di align ang pinto. True enough, nakita ko na may tama ang latch ng lock. Yung metal part ng pinto mismo may tupi at chipped off paint at ang plastic naman na housing ng latch ng lock, basag. Sigh, papa ayos ko na lang ito sa 25k PSM, balak ko nga papalitan ng pinto kung warranty naman eh kasi yung integrity ng paint at corrosion protection na compromise na. Kaso baka pintahan lang nila ito or i-touch up.

- Wheel alignment, wala silang capability at sa labas lang din pinapagawa. Ako na lang ang nagdala mas mura pa inabot.

PS - I hope this is not start of mga sakit sakit ng livina

ianski wrote:- Replaced Power Steering assembly - Buti na lang covered ng warranty ang parts na ito... Common problem daw ito ng Livina kaso di ko naman nakikita dito sa Forum.

- I reported na may sabit ang left front passenger door ko at hindi smooth ang pag sara, at kailangan mo medyo malakas na force. Lagi ko ito nirereport tuwing PMS pero wala silang makita raw at normal daw ito lalo na pag may pressure sa loob. Kaso kahit di sarado ang ibang pinto, may ganitong problem pa rin. Just last week pinag aralan ko ulit kasi suspetsa ko di align ang pinto. True enough, nakita ko na may tama ang latch ng lock. Yung metal part ng pinto mismo may tupi at chipped off paint at ang plastic naman na housing ng latch ng lock, basag. Sigh, papa ayos ko na lang ito sa 25k PSM, balak ko nga papalitan ng pinto kung warranty naman eh kasi yung integrity ng paint at corrosion protection na compromise na. Kaso baka pintahan lang nila ito or i-touch up.

- Wheel alignment, wala silang capability at sa labas lang din pinapagawa. Ako na lang ang nagdala mas mura pa inabot.

PS - I hope this is not start of mga sakit sakit ng livina

I think you are referring to the steering linkage assembly which was an issue on earlier models.

On your door latch problem, kindly send a report to nissan customer service at info@nissan.com.ph and attach pictures for their evaluation. Send a bcc copy of the email in my email address lydemer@gmail.com so I can send it to my internal contact at the plant to facilitate quicker response to your inquiry.

Sir Lydemer, yun nga ang tamang tawag dun. I will send an email tonight, salamat for looking into this also.

Buti na lang may LOOP, kaso guilty ako sa pagiging absent sa EB including the fun trip this Saturday... hopefully other EB makakapunta na ako

ianski wrote:Sir Lydemer, yun nga ang tamang tawag dun. I will send an email tonight, salamat for looking into this also.

Buti na lang may LOOP, kaso guilty ako sa pagiging absent sa EB including the fun trip this Saturday... hopefully other EB makakapunta na ako

No worries, next EB most likely ayos na ang mga problems ng GL mo. Me mga ibang clark events scheduled this May and June.

ito yung problema... sensya na sa picture, now pa lang nag upload...

ianski wrote:

ito yung problema... sensya na sa picture, now pa lang nag upload...

Thanks Ianski, I have already sent a copy of the email sent at gmail to my contact in Nissan, Sta Rosa.

definitely alignment problem ito sir... covered pa ng warranty dapat yan.

Hi Ianski, your email is already with the After-Sales, Engineering & Quality, and Manufacturing Process team at Nissan. It is assured by my contact in Nissan that your issue will be rectified in the soonest possible time.

Salamat Lydemer, hopefully silipin rin ng NMPI ang skills at attitude ng technician ng southwoods. Minsan kasi alam naman ng mga technician, tinatamad lang or something... meron pa nga isang case sa Nissan Dasmarinas naman, nag top-up ng tubig sa coolant ko... di ko na napigilan, I hope it is not enough to start causing scales kasi tap water lang nilagay. Same owner lang ito ng Nissan Southwoods.

Aln, definitely kasama ito (at ipaglalaban ko), kasi from the start naramdaman ko na ito at nireport na. Di ko lang alam pa rin ano mas maganda kung i-push ko palitan ang buong pinto (paano ang paint), or pa ayos na lang at re-touch (kaso baka na compromise na ang rust proofing). Sigh, di ko nga alam kung bakit nakaligtas ito sa QC nila eh.

ianski wrote:Salamat Lydemer, hopefully silipin rin ng NMPI ang skills at attitude ng technician ng southwoods. Minsan kasi alam naman ng mga technician, tinatamad lang or something... meron pa nga isang case sa Nissan Dasmarinas naman, nag top-up ng tubig sa coolant ko... di ko na napigilan, I hope it is not enough to start causing scales kasi tap water lang nilagay. Same owner lang ito ng Nissan Southwoods.

Aln, definitely kasama ito (at ipaglalaban ko), kasi from the start naramdaman ko na ito at nireport na. Di ko lang alam pa rin ano mas maganda kung i-push ko palitan ang buong pinto (paano ang paint), or pa ayos na lang at re-touch (kaso baka na compromise na ang rust proofing). Sigh, di ko nga alam kung bakit nakaligtas ito sa QC nila eh.

Hi Ianski, maganda at na-report ang problem mo and what is important is how it can be remedied. Now on your issue with the dent in your door, the ding is repairable once the collision part is repaired and treated. Di kaagad mag-rust yan kasi may zinc chromate primer ang mga panels ng GL natin. In addition, kailangan din tignan if there is a failure sa door door hinge mo, causing the misalignment. The way to test this is while the door is open, try moving your door up and if there is a play, me problem ang door hinge mo. Likewise there will be an inquest on your issue and the proper rectification will be dealt with and ensure that this incident will not happen to other customers. We as customers should be vigilant in providing feedback to the manufacturers so they can issue improvements to the quality of their products. It is also not unusual that defects like these happens not only to Nissan but to other manufacturers. Other manufacturers are issuing recalls even though they are very popular brands. Let's wait for the feedback and what is important right now is that the proper people already knows your problem. Maayos din yan.

ianski wrote:- Replaced Power Steering assembly - Buti na lang covered ng warranty ang parts na ito... Common problem daw ito ng Livina kaso di ko naman nakikita dito sa Forum.

- I reported na may sabit ang left front passenger door ko at hindi smooth ang pag sara, at kailangan mo medyo malakas na force. Lagi ko ito nirereport tuwing PMS pero wala silang makita raw at normal daw ito lalo na pag may pressure sa loob. Kaso kahit di sarado ang ibang pinto, may ganitong problem pa rin. Just last week pinag aralan ko ulit kasi suspetsa ko di align ang pinto. True enough, nakita ko na may tama ang latch ng lock. Yung metal part ng pinto mismo may tupi at chipped off paint at ang plastic naman na housing ng latch ng lock, basag. Sigh, papa ayos ko na lang ito sa 25k PSM, balak ko nga papalitan ng pinto kung warranty naman eh kasi yung integrity ng paint at corrosion protection na compromise na. Kaso baka pintahan lang nila ito or i-touch up.

- Wheel alignment, wala silang capability at sa labas lang din pinapagawa. Ako na lang ang nagdala mas mura pa inabot.

PS - I hope this is not start of mga sakit sakit ng livina

@lanski: ano po yung naging problema sa power steering ng GL nyo? nais ko lang pong malaman para naman maagapan kung sakaling mangyari din sa GL namin.

@primera - may ingay raw pag nag fu-full turn. di ko ito nararamdaman or naririnig at nahuli lang during PMS.